Link ECU G4X WRXLink (07) WRX107X PlugIn ECU fits the Subaru Impreza WRX & STI V10 06-07

  • £1,674.00
    Unit price per 
Tax included.


WRXLINK (V10) - WRX107X

G4X PlugIn ECUs offer the latest in engine management technology, designed to easily maximize the potential from your car.  

This ECU fits inside the factory OEM enclosure. Installation is a breeze, with no alteration of the factory wiring loom required for the models listed below. 

Designed for the WRX V10 EJ25. These ECUs cover 2.5L from 2004 to 2007. 

Please check your connector matches the header in the listed photo and check the notes in italic below before purchasing.  

  • Please check your connector matches the header in the listed photo and check the notes in italic below before purchasing.  
  • This ECU works for manual transmissions only.  
  • Air temp sensor highly recommended. 
  • Most factory features are supported. 
  • Check the features tab for I/O expansion options  

Suitable Applications:

The WRX104 (listed separately) mostly covered the 2004-2006 range.

The WRX107 mostly covers the 2007 model.

However, some 2006 models require the WRX107X 

*The fastest and most reliable way to tell, is to check whether pins A1-3 are populated. 

*If the pins have wires, you need the WRX104X, if there are no wires, you need the WRX107X 

*Suits GD or GG chassis with electronic throttle.  Not suitable for the GR/GH/GE/GV hatchback or 3rd generation WRX’s

G4X PlugIn Key Features (where applicable):

Up to 6D fuel and ignition mapping

Precision closed loop cam control (four cam, independent control)

Sequential fuel delivery

Digital triggering, all OEM patterns

OEM idle hardware supported

5D boost control with three switchable tables

Motorsport features - antilag, launch, flat shift

Continuous barometric correction (on board)

CAN port

QuickTune - automated fuel tuning

Individual cylinder correction

USB tuning cable included

Stats recording into on-board memory

Gear compensations for spark, boost and fuel

Real time selectable dual fuel, ignition and boost maps

Sync and crank sensors can be a combination of Hall effect, variable reluctance or optical

Boost control referenced to gear, speed or throttle position

512 mega bytes data logging memory

Staged injection

Knock with "windowing"

There are two different options for the expansion connectors, depending on whether your ECU is the 2004-2006 ECU or the 2006-2007 ECU. 

2004-2006 ECU 

The following expansion connector inputs/outputs are provided: 

Blank                AN Volt 11 

An Temp 4        Temperature sensor input 

Blank                No function 

Blank                AN Volt 12 

Blank                No function 

Blank                No function 

+5V Out        Low Current +5V Supply 

Gnd                Sensor Ground Only 

2006-2007 ECU 

The 2006-2007 V10 ECU contains an 8 pin expansion connector. 

The following expansion connector inputs/outputs are provided: 

Aux 11                Auxiliary Output 

An Temp 4        Temperature sensor input 

Aux 12                Auxiliary Output 

Volt 11                Analog 0-5V input 

Aux 13                Auxiliary Output 

DI 11                Digital Input 

+5V Out        Low Current +5V Supply 

Gnd                Sensor Ground Only  

CAN LAMBDA

CAN Lambda Link’s CAN-Lambda is an easy to use CAN-module that provides digital wideband sensor control via CAN bus and is compatible with leading aftermarket ECUs.

The CAN-Lambda’s ability to measure the proportion of oxygen in exhaust gases makes it an essential tool for accurately tuning fuel mixtures as well allowing your ECU to make tuning adjustments on the fly. 

Being fully digital the CAN-Lambda’s powerful LSU 4.9 sensor will eliminate any loss of signal, risk, delays and errors that analogue alternatives cause. The CAN-Lambda never requires free air calibration. 

BOX CONTENTS

  • CAN-Lambda device
  • Bosch LSU4.9 Sensor
  • Deutsch 4-Way Connector Kit
  • O2 Bung and Plug
  • 2 Large Stickers
  • 2 Small Stickers
  • Quick Start Guide

Dimensions
Enclosure 60 x 26 x 15mm
Lead length 170mm
Weight 70g

Input Voltage
Controller 7.5 - 20 V
Sensor 10.8 - 16.5 V

Input Current
Controller 100 mA
Sensor Heater 8 A

Operating Temp -20 - 100 deg.C
Sensor Bosch LSU4.9
Sensing Range 0.67 - 10 lambda

CAN Frequency 1Mb/s,500kb/s,250kb/s,125kb/s

LINK MXS 5"

The LINK ECU MXS Strada Car Dash Display is the evolution of MXL Strada, one of the most widely-spread dashes on tracks and streets all over the world. The MXS Strada has a 5″ colour display with great visual impact, configurable to show lap times and all the info coming from the Engine Control Unit (ECU) , analog/digital inputs, pre-defined math channels and optionally, the GPS Module. Its data sampling capability can also be incremented adding up to eight expansion modules.

LINK ECU MXS Strada Car Dash Display is a high colour, high contrast 5" TFT dash display ideal Street and race car/bike installations. The Dashes are available with (Road) and without (Race) icons and are fully configurable.

The Road icon edition has Road icons down the side, which include turn signals, high beam lights, oil pressure, water temperature warnings and an engine check light.

** The Link MXS VERSION Has An Engine Check Light instead of a Low Fuel warning light. See Photos.

You can configure alarm LEDs choosing colour, blinking frequency and defining the logic for turning them on or off. 

The Aim MXS Strada Car Racing Dash/Display is for use on tracks and streets. It acquires data from the ECU of your vehicle making it relatively easy to fit.

An additional socket on dash for a Reversing Camera.

What you are buying: 

Link ECU MXS Strada
USB cable
14 pin standard wiring
23 pin connector + contacts

LINK MXG 7"

Link MXG Strada 7” dash, powered by AIM.

The Link MXG Strada Street edition is a full colour, 7-inch dash display legal for road use featuring 10 RGB shift lights and street icons down the side of the dash. It is pre-configured to work with all Link G4+/G4X Wire-In and Plug-in ECU's. See features tab for more information.

The Link MXG Strada Street Edition dash features customisable shift lights, six street icons and a high contrast 7” TFT screen display. Visual quality is always optimal as the ambient light sensor auto-adjusts the brightness of the display. 

The 10 multi-coloured RGB shift lights on the MXS Strada can be customised to your liking to define the RPM threshold for each single gear. There are also 8 Street Icons located to the side of the screen. These include an indicator lights, headlight, high beam, check engine, oil pressure warning light, temperature warning light and fuel light.

The dash is extremely easy to use, with buttons on the side to navigate through a library of preset display styles, depending on what information you want to see and in what layout. The screen can display all real-time information reading from the ECU such as RPM, speed, water temperature, oil pressure and much more. 

The Link MXG connects directly to your Link ECU via the pin kit and wiring provided in the box.

What you are buying: 

Link MXG 1.2 Strada
USB cable
14 pin standard wiring
23 pin connector + contacts


 


We Also Recommend