Reinz XL A4 Create Your Own Gaskets Gasket Paper Repair Sealing Kit & Sealant

£42.50
Unit price per

Tax included.

Part no: 16-27250-03 & 70-31414-10

Paper size: 210 X 297 mm (A4)

DIN-A4

Included in this Kit:

1 X AFM 22 - Thickness: 1.2mm

1 X AFM 37/8 - Thickness: 0.50mm

1 X AFM 37/8 - Thickness: 1.00mm

1 X REINZOLOID FS 53 - Thickness: 0.50mm

1 X REINZOLOID FS 53 - Thickness: 1.00mm

Gasket Sealant 70ml

Description :

AFM 22 : AFM 22 is the next step up on the ladder of metal-reinforced for cylinder head gaskets in combustion engines. Configured in line with the AFM 20, the AFM 22 will tackle any of the challenges which come up in virtually any conceivable operating situation. It is resistant to all of the usual liquid media that come up in engines and can withstand great mechanical stress.

AFM 37/8 : AFM 37/8 is a highly cost-effective yet high-performance material for low to moderate sealing requirements. It possesses good thermal and mechanical behaviour and is particularly suited to sealing against oil and other liquids.

REINZOLOID FS 53: REINZOLOID FS 53 is an impregnated soft composite material on a cellulose base and features a good cost-to-benefit ratio. Gaskets made of cellulose are very adaptable and prove highly durable in contact with oil and fuel. When used on the right sealing joint, REINZOLOID FS 53 makes effective and affordable gasket solution.

REINZ GASKET SEALER : This sealant is solvent-free , permanently elastic and fast hardening silicone compound for sealing flat surfaces where there is a sealing gap.

Technical Data:

AFM 22

Material

AFM 22 consists of a tanged and galvanized steel core. An asbestos-free soft material compound containing aramide fibers, inorganic fillers and high-grade binder elastomers is applied to both sides of the core.

Properties

AFM 22 exhibits very high mechanical strength together with very high pressure and temperature resistance, yet still conforms well to sealing surfaces.
The material is resistant to oils, fuels, and mixtures of water and antifreeze or corrosion inhibitors.

Application

for cylinder head gaskets in standard IC engines
for other sealed joints subjected to high mechanical and thermal stress, e.g. intake and exhaust manifolds, transmission flanges, and high-pressure pumps

Surfaces

For special applications, full-surface or partial coatings are available, e.g. a non-stick coating on a PTFE basis (also possible on materials in roll form) or a silicone-based coating that improves micro-sealing (only available as a finished gasket). Screen printing with various elastomers is also possible.

Approvals

Germanischer Lloyd (DNV GL)
Approval for shipbuilding

Technical Data
(nominal thickness 1.30 mm)

Weight per surface unit	kg/m²	≈ 3.8
Residual stress acc. to DIN 52 913
16 h, 300 °C	N/mm²	> 40
Compressibility and recovery
acc. to ASTM F 36, procedure J
compressibility	%	7 - 13
recovery	%	> 55
Swelling acc. to ASTM F 146
in IRM 903 Oil (replaces ASTM Oil No. 3)
5 h, 150 °C
increase in thickness	%	< 10
in water / antifreeze (50:50)
5 h, 100 °C
increase in thickness	%	< 7
Operating temperature
maximum	°C	400
Surface pressure
maximum at 300 °C	N/mm²	100

AFM 37/8

Material

REINZ-AFM 37/8 is an asbestos-free gasket material. It consists of aramide fibers and other asbestos substitutes that are resistant to high temperatures and are processed with high-grade elastomers under elevated pressure and temperature.

Properties

REINZ-AFM 37/8 is a very ecomomical gasket material. It exhibits good thermal/mechanical strength, is highly conformable, and is suitable for sealing oils and other liquids.

Application

For sealed joints that are subjected to low or medium mechanical stress.

Surfaces

As standard, both sides of AFM 37/8 are coated with a non-stick, high-friction layer that greatly facilitates disassembly. In most cases, additional surface treatment is unnecessary.

Technical Data
(nominal thickness 2.00 mm)

Density	g/cm³	1.7 - 1.9

Ignition loss acc. to DIN 52 911	%	< 38

Tensile strength
acc. to ASTM F 152, across grain	N/mm²	> 7
acc. to DIN 52 910, across grain	N/mm²	> 5

Residual stress acc. to DIN 52 913
16 h, 175 °C	N/mm²	≈ 25

Compressibility and recovery
acc. to ASTM F 36, procedure J
compressibility	%	8 - 15
recovery	%	> 50

Sealability against nitrogen
acc. to DIN 3535, Part 6 FA	mg/(s·m)	< 0.1

Swelling acc. to ASTM F 146

in Oil IRM 903 (replaces ASTM Oil No. 3)
5 h, 150 °C
increase in thickness	%	< 10
increase in weight	%	< 15

in ASTM Fuel B
5 h, room temp.
increase in thickness	%	< 10
increase in weight	%	< 15

in water / antifreeze (50:50)
5 h, 100 °C
increase in thickness	%	< 10
increase in weight	%	< 15

Short-term peak temperature	°C	300

Maximum continuous temperature	°C	200

Maximum operating pressure	bar	60

REINZOLOID FS 53

Material

REINZOLOID FS 53 is a gasket material based on glue-bonded, impregnated cellulose fibers.

Properties

REINZOLOID FS 53 is an economical gasket material with good resistance to oils and fuels. In addition, the material is compressible and conformable.

Application

in transmissions, carburettors, fuel and oil pumps, axles
for sealing fuels, oils, water, mixtures of water & antifreeze and corrosion inhibitors

The use of this material for steam and dry heat service is not recommended.

Technical Data

Density		g/cm³	0.7 - 0.9

Tensile strength (thickness 1.5 mm)
acc. to ASTM F 152	across grain	N/mm²	> 20
acc. to DIN 52 910	across grain	N/mm²	> 15

Compressibility and recovery acc. to ASTM F 36, procedure G
compressibility		%	20 - 40
recovery		%	> 35

Swelling acc. to ASTM F 146:

in IRM 903 Oil (replaces ASTM Oil No. 3) 22 h, room temp.
increase in thickness		%	< 5
increase in weight		%	< 20

in ASTM Fuel B 22 h, room temp.
increase in thickness		%	< 5
increase in weight		%	< 15

in water / antifreeze (50:50) 22 h, room temp.
increase in thickness		%	< 30
increase in weight		%	< 95

Maximum operating temperature		°C	120

Maximum operating pressure		bar	10

Reinzosil Features:

High Thermal stability from -50 C to +300C
Very good durability agaisnt internal combustion fuels and disel fuels, oil, grease , lubricants, water and sunlight
Easy to position
Easy to apply
Precise positioning, down to the last millimeter
Goes on evenly
Container empties completely i.e waste
Protective cap prevents nozzle from blocking
Prevents corrosion of the sealing surfaces
Acid free hardening means no damage to synthetic parts and electrical components
Odourless

Application Areas:

Intended for sealing all surfaces in engines , gearboxes and axles and also cylinder liners and synthetic housings
Very suitable for uneven and rough surfaces
All purpose application for use with all makes of engines and vehicles